Indian ITC-HS · Section XV
Chapter 72
Iron and steel
29 Headings167 Subheadings529 Tariff Items
Source: CBIC Part II Import Tariff, chapter-wise PDFs·Indian Customs Tariff — First Schedule (as on 30.06.2024, CBIC)
Section XV
BASE METALS AND ARTICLES OF BASE METAL
Showing each item's best available FTA rate beside its MFN baseline.
Headings, subheadings & tariff items
|
72021100Containing by weight more than 2% of carbonMFN 5%→0%72021900OtherMFN 5%→0%72022100Containing by weight more than 55% of siliconMFN 5%→0%72022900OtherMFN 5%→0%72023000Ferro-silico-manganeseMFN 5%→0%72024100Containing by weight more than 4% of carbonMFN 5%→0%72024900OtherMFN 5%→0%72025000Ferro-silico-chromiumMFN 5%→0%72026000Ferro-nickelMFN 0%72027000Ferro-molybdenumMFN 5%→0%72028000Ferro tungsten and ferro-silico-tungstenMFN 5%→0%72029100Ferro-titanium and Ferro-silico-titaniumMFN 5%→0%72029200Ferro-vanadiumMFN 5%→0%72029300Ferro-niobiumMFN 5%→0%72029911- Ferro-phosphorusMFN 5%→0%72029912- Ferro-seleniumMFN 5%→0%72029913- Ferro-cobaltMFN 5%→0%72029914- Ferro-columbiumMFN 5%→0%72029915- Ferro-zirconiumMFN 5%→0%72029916- Ferro-tantalumMFN 5%→0%72029921- Ferro-silico-zirconiumMFN 5%→0%72029922- Ferro-silico-magnesiumMFN 5%→0%72029931- Ferro-boronMFN 5%→0%72029932- Charge-chromeMFN 5%→0%72029990OtherMFN 5%→0%
72041000Waste and scrap of cast ironMFN 0%72042110Empty or discharged cartridges of all bores and sizesMFN 0%72042190OtherMFN 0%72042910Empty or discharged cartridges of all bores and sizesMFN 0%72042920Of high speed steelMFN 0%72042990OtherMFN 0%72043000Waste and scrap of tinned iron or steelMFN 0%72044100Turnings, shavings, chips, milling waste, saw dust, fillings, trimmings and stampings, whether or not in bundlesMFN 0%72044900OtherMFN 0%72045000Remelting scrap ingotsMFN 0%
72051011- Shot and angular gritMFN 5%→0%72051012- Wire pelletsMFN 5%→0%72051019- OtherMFN 5%→0%72051021- Shot and angular gritMFN 5%→0%72051022- Wire pelletsMFN 5%→0%72051029- OtherMFN 5%→0%72051090OtherMFN 5%→0%72052100Of alloy steelMFN 5%→0%72052910Of ironMFN 5%→0%72052990Other II.-IRON AND NON-ALLOY STEELMFN 5%→0%
72061010Of ironMFN 7.5%→0%72061020Of high carbon steelMFN 7.5%→0%72061090OtherMFN 7.5%→0%72069011- Puddled bars and pilingsMFN 7.5%→0%72069012- Blocks, lumps and similar formsMFN 7.5%→0%72069019- OtherMFN 7.5%→0%72069091- Puddled bars and pilingsMFN 7.5%→0%72069092- Blocks, lumps and similar formsMFN 7.5%→0%72069099- OtherMFN 7.5%→0%
72071110Electrical qualityMFN 7.5%→0%72071120Forging qualityMFN 7.5%→0%72071130Seamless steel tube qualityMFN 7.5%→0%72071190OtherMFN 7.5%→0%72071210Electrical qualityMFN 7.5%→0%72071220Forging qualityMFN 7.5%→0%72071230Seamless steel tube qualityMFN 7.5%→0%72071290OtherMFN 7.5%→0%72071910Forged blanks of non-alloy steelMFN 7.5%→0%72071920Mild steel billetsMFN 7.5%→0%72071990OtherMFN 7.5%→0%72072010Forging qualityMFN 7.5%→0%72072020Spring steel qualityMFN 7.5%→0%72072030Seamless steel tube qualityMFN 7.5%→0%72072090OtherMFN 7.5%→0%
72081000In coils, not further worked than hot-rolled, with patterns in relief rolled, pickled :MFN 7.5%→0%72082510PlatesMFN 7.5%→0%72082520Universal platesMFN 7.5%→0%72082530SheetsMFN 7.5%→0%72082540StripMFN 7.5%→0%72082590OtherMFN 7.5%→0%72082610PlatesMFN 7.5%→0%72082620Universal platesMFN 7.5%→0%72082630SheetsMFN 7.5%→0%72082640StripMFN 7.5%→0%72082690OtherMFN 7.5%→0%72082710PlatesMFN 7.5%→0%72082720Universal platesMFN 7.5%→0%72082730SheetsMFN 7.5%→0%72082740StripMFN 7.5%→0%72082790OtherMFN 7.5%→0%72083610PlatesMFN 7.5%→0%72083620Universal platesMFN 7.5%→0%72083630SheetsMFN 7.5%→0%72083640StripMFN 7.5%→0%72083690OtherMFN 7.5%→0%72083710PlatesMFN 7.5%→0%72083720Universal platesMFN 7.5%→0%72083730SheetsMFN 7.5%→0%72083740StripMFN 7.5%→0%72083790OtherMFN 7.5%→0%72083810PlatesMFN 7.5%→0%72083820Universal platesMFN 7.5%→0%72083830SheetsMFN 7.5%→0%72083840StripMFN 7.5%→0%72083890OtherMFN 7.5%→0%72083910PlatesMFN 7.5%→0%72083920Universal platesMFN 7.5%→0%72083930SheetsMFN 7.5%→0%72083940StripMFN 7.5%→0%72083990OtherMFN 7.5%→0%72084010PlatesMFN 7.5%→0%72084020Universal platesMFN 7.5%→0%72084030SheetsMFN 7.5%→0%72084040StripMFN 7.5%→0%72084090Other hot-rolled :MFN 7.5%→0%72085110PlatesMFN 7.5%→0%72085120Universal platesMFN 7.5%→0%72085130SheetsMFN 7.5%→0%72085140StripMFN 7.5%→0%72085190OtherMFN 7.5%→0%72085210PlatesMFN 7.5%→0%72085220Universal platesMFN 7.5%→0%72085230SheetsMFN 7.5%→0%72085240StripMFN 7.5%→0%72085290OtherMFN 7.5%→0%72085310PlatesMFN 7.5%→0%72085320Universal platesMFN 7.5%→0%72085330SheetsMFN 7.5%→0%72085340StripMFN 7.5%→0%72085390OtherMFN 7.5%→0%72085410PlatesMFN 7.5%→0%72085420Universal plates Amended by Notn. No. 48/18MFN 7.5%→0%72085430SheetsMFN 7.5%→0%72085440StripMFN 7.5%→0%72085490OtherMFN 7.5%→0%72089000OtherMFN 7.5%→0%
72091510PlatesMFN 7.5%→0%72091520SheetsMFN 7.5%→0%72091530StripMFN 7.5%→0%72091590OtherMFN 7.5%→0%72091610PlatesMFN 7.5%→0%72091620SheetsMFN 7.5%→0%72091630StripMFN 7.5%→0%72091690OtherMFN 7.5%→0%72091710PlatesMFN 7.5%→0%72091720SheetsMFN 7.5%→0%72091730StripMFN 7.5%→0%72091790OtherMFN 7.5%→0%72091810PlatesMFN 7.5%→0%72091820SheetsMFN 7.5%→0%72091830StripMFN 7.5%→0%72091890Other rolled (cold-reduced) :MFN 7.5%→0%72092510PlatesMFN 7.5%→0%72092520SheetsMFN 7.5%→0%72092530StripMFN 7.5%→0%72092590OtherMFN 7.5%→0%72092610PlatesMFN 7.5%→0%72092620SheetsMFN 7.5%→0%72092630StripMFN 7.5%→0%72092690OtherMFN 7.5%→0%72092710PlatesMFN 7.5%→0%72092720SheetsMFN 7.5%→0%72092730StripMFN 7.5%→0%72092790OtherMFN 7.5%→0%72092810PlatesMFN 7.5%→0%72092820SheetsMFN 7.5%→0%72092830StripMFN 7.5%→0%72092890OtherMFN 7.5%→0%72099000OtherMFN 7.5%→0%
72101110OTS/MR TypeMFN 7.5%→0%72101190OtherMFN 7.5%→0%72101210OTS/MR TypeMFN 7.5%→0%72101290OtherMFN 7.5%→0%72102000Plated or coated with lead, including terne-plateMFN 7.5%→0%72103010CorrugatedMFN 7.5%→0%72103091GalvannealedMFN 7.5%→0%72103099OtherMFN 7.5%→0%72104100CorrugatedMFN 7.5%→0%72104910GalvannealedMFN 7.5%→0%72104990OtherMFN 7.5%→0%72105000Plated or coated with chromium oxides or with chromium and chromium oxidesMFN 7.5%→0%72106100Plated or coated with aluminium-zinc alloysMFN 7.5%→0%72106900OtherMFN 7.5%→0%72107000Painted, varnished or coated with plasticsMFN 7.5%→0%72109010LacqueredMFN 7.5%→0%72109090OtherMFN 7.5%→0%
72111300Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in reliefMFN 7.5%→0%72111410FlatsMFN 7.5%→0%72111420Universal platesMFN 7.5%→0%72111430HoopsMFN 7.5%→0%72111440SheetsMFN 7.5%→0%72111450StripMFN 7.5%→0%72111460SkelpMFN 7.5%→0%72111490OtherMFN 7.5%→0%72111910FlatsMFN 7.5%→0%72111920Universal platesMFN 7.5%→0%72111930HoopsMFN 7.5%→0%72111940SheetsMFN 7.5%→0%72111950StripMFN 7.5%→0%72111960SkelpMFN 7.5%→0%72111990OtherMFN 7.5%→0%72112310FlatsMFN 7.5%→0%72112320Universal platesMFN 7.5%→0%72112330HoopsMFN 7.5%→0%72112340SheetsMFN 7.5%→0%72112350StripMFN 7.5%→0%72112390OtherMFN 7.5%→0%72112910FlatsMFN 7.5%→0%72112920Universal platesMFN 7.5%→0%72112930HoopsMFN 7.5%→0%72112940SheetsMFN 7.5%→0%72112950StripMFN 7.5%→0%72112960SkelpMFN 7.5%→0%72112990OtherMFN 7.5%→0%72119011- Of boiler qualityMFN 7.5%→0%72119012- Of high tensile qualityMFN 7.5%→0%72119013- Of ship building qualityMFN 7.5%→0%72119090OtherMFN 7.5%→0%
72121010OTS or MR typeMFN 7.5%→0%72121090OtherMFN 7.5%→0%72122010CorrugatedMFN 7.5%→0%72122090Other72122091GalvannealedMFN 7.5%→0%72122099OtherMFN 7.5%→0%72123010CorrugatedMFN 7.5%→0%72123090Other72123091GalvannealedMFN 7.5%→0%72123099OtherMFN 7.5%→0%72124000Painted, varnished or coated with plasticsMFN 7.5%→0%72125010Plated or coated with leadMFN 7.5%→0%72125020LacqueredMFN 7.5%→0%72125030plated or coated with aluminiumMFN 7.5%→0%72125040plated or coated with aluminium-zinc alloysMFN 7.5%→0%72125090OtherMFN 7.5%→0%72126000CladMFN 7.5%→0%
72131010Of free cutting steelMFN 7.5%→0%72131090OtherMFN 7.5%→0%72132010Electrode qualityMFN 7.5%→0%72132020Cold heading qualityMFN 7.5%→0%72132090OtherMFN 7.5%→0%72139110Electrode qualityMFN 7.5%→0%72139120Cold heading qualityMFN 7.5%→0%72139190OtherMFN 7.5%→0%72139910Electrode qualityMFN 7.5%→0%72139920Cold heading qualityMFN 7.5%→0%72139990OtherMFN 7.5%→0%
72141010Spring steel qualityMFN 7.5%→0%72141090OtherMFN 7.5%→0%72142010Spring steel qualityMFN 7.5%→0%72142090OtherMFN 7.5%→0%72143000Other, of free cutting steelMFN 7.5%→0%72149110Mild steel bright barMFN 7.5%→0%72149190OtherMFN 7.5%→0%72149910Of spring steel qualityMFN 7.5%→0%72149990OtherMFN 7.5%→0%
72161000U, I or H sections, not further worked than hot- rolled,hot-drawn or extruded, of a height of less Amended by Notn. No. 48/18 than 80 mm rolled, hot-drawn or extruded, of a height of less than 80 mm :MFN 7.5%→0%72162100L sectionsMFN 7.5%→0%72162200T sections hot-rolled, hot-drawn or extruded of a height of 80 mm or more :MFN 7.5%→0%72163100U sectionsMFN 7.5%→0%72163200I sectionsMFN 7.5%→0%72163300H sectionsMFN 7.5%→0%72164000L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or moreMFN 7.5%→0%72165000Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded worked than cold-formed or cold-finished :MFN 7.5%→0%72166100Obtained from flat-rolled productsMFN 7.5%→0%72166900OtherMFN 7.5%→0%72169100Cold-formed or cold-finished from flat rolled productsMFN 7.5%→0%72169910Plated or coated with zincMFN 7.5%→0%72169920Plated or coated with base metals other than zincMFN 7.5%→0%72169930Slotted angles and slotted channelsMFN 7.5%→0%72169940ForgedMFN 7.5%→0%72169990OtherMFN 7.5%→0%
72171010Of a thickness of 18 SWG and belowMFN 7.5%→0%72171020Of a thickness above 18 SWG but up to 26 SWGMFN 7.5%→0%72171030Of a thickness above 26 SWGMFN 7.5%→0%72172010Of a thickness of 18 SWG and belowMFN 7.5%→0%72172020Of a thickness above 18 SWG but up to 26 SWGMFN 7.5%→0%72172030Of a thickness above 26 SWGMFN 7.5%→0%72173010Of a thickness of 18 SWG and belowMFN 7.5%→0%72173020Of a thickness above 18 SWG but up to 26 SWGMFN 7.5%→0%72173030Of a thickness above 26 SWGMFN 7.5%→0%72179011- Of cross section - half roundMFN 7.5%→0%72179012- Of cross section - flat and rectangularMFN 7.5%→0%72179013- Of cross section - 'z' shapedMFN 7.5%→0%72179019- Of cross section - other shapesMFN 7.5%→0%72179091- High tensile qualityMFN 7.5%→0%72179092- Electrode qualityMFN 7.5%→0%72179093- Electric resistance wire (including electric resistance heating wire)MFN 7.5%→0%72179099- Other III.-STAINLESS STEELMFN 7.5%→0%
72191111- Not exceeding 14 mmMFN 7.5%→0%72191112- Exceeding 14 mmMFN 7.5%→0%72191190OtherMFN 7.5%→0%72191200Of a thickness of 4.75 mm or more but not exceeding 10 mmMFN 7.5%→0%72191300Of a thickness of 3 mm or more but less than 4.75 mmMFN 7.5%→0%72191400Of a thickness of less than 3 mmMFN 7.5%→0%72192111- Not exceeding 14 mmMFN 7.5%→0%72192112- Exceeding 14 mm steel, nickel chromium austenitic type: Amended by Notn. No. 48/18MFN 7.5%→0%72192121- Not exceeding 14 mmMFN 7.5%→0%72192122- Exceeding 14 mmMFN 7.5%→0%72192131- Not exceeding 14 mmMFN 7.5%→0%72192132- Exceeding 14 mmMFN 7.5%→0%72192141- Not exceeding 14 mmMFN 7.5%→0%72192142- Exceeding 14 mmMFN 7.5%→0%72192190OtherMFN 7.5%→0%72192211- Chromium typeMFN 7.5%→0%72192212- Nickel chromium austenitic typeMFN 7.5%→0%72192219- OtherMFN 7.5%→0%72192291- Chromium typeMFN 7.5%→0%72192292- Nickel chromium austenitic typeMFN 7.5%→0%72192299- OtherMFN 7.5%→0%72192310Chromium typeMFN 7.5%→0%72192320Nickel chromium austenitic typeMFN 7.5%→0%72192390OtherMFN 7.5%→0%72192411- Below 0.35 mmMFN 7.5%→0%72192412- 0.35 mm and above but below 0.56 mmMFN 7.5%→0%72192413- 0.56 mm and above but below 0.90 mmMFN 7.5%→0%72192419- OtherMFN 7.5%→0%72192421- Below 0.35 mmMFN 7.5%→0%72192422- 0.35 mm and above but below 0.56 mmMFN 7.5%→0%72192423- 0.56 mm and above but below 0.90 mmMFN 7.5%→0%72192429- OtherMFN 7.5%→0%72192490OtherMFN 7.5%→0%72193111- Not exceeding 14 mmMFN 7.5%→0%72193112- Exceeding 14 mmMFN 7.5%→0%72193121- Not exceeding 14 mmMFN 7.5%→0%72193122- Exceeding 14 mmMFN 7.5%→0%72193190OtherMFN 7.5%→0%72193210Chromium typeMFN 7.5%→0%72193220Nickel chromium austenitic typeMFN 7.5%→0%72193290OtherMFN 7.5%→0%72193310Chromium typeMFN 7.5%→0%72193320Nickel chromium austenitic typeMFN 7.5%→0%72193390OtherMFN 7.5%→0%72193410Chromium typeMFN 7.5%→0%72193420Nickel chromium austenitic typeMFN 7.5%→0%72193490OtherMFN 7.5%→0%72193510Chromium typeMFN 7.5%→0%72193520Nickel chromium austenitic typeMFN 7.5%→0%72193590OtherMFN 7.5%→0%72199011- Thickness more than 4.75 mmMFN 7.5%→0%72199012- Thickness 3 mm to 4.75 mmMFN 7.5%→0%72199013- Thickness less than 3 mmMFN 7.5%→0%72199090OtherMFN 7.5%→0%
72201110Skelp for pipes and tubesMFN 7.5%→0%72201121- Chromium typeMFN 7.5%→0%72201122- Nickel chromium austenitic typeMFN 7.5%→0%72201129- OtherMFN 7.5%→0%72201190OtherMFN 7.5%→0%72201210Skelp for pipes and tubesMFN 7.5%→0%72201221- Chromium typeMFN 7.5%→0%72201222- Nickel chromium austenitic typeMFN 7.5%→0%72201229- OtherMFN 7.5%→0%72201290OtherMFN 7.5%→0%72202010Skelp for pipes and tubes Amended by Notn. No. 48/18MFN 7.5%→0%72202021- Chromium typeMFN 7.5%→0%72202022- Nickel chromium austenitic typeMFN 7.5%→0%72202029- OtherMFN 7.5%→0%72202090OtherMFN 7.5%→0%72209010Skelp (strips for pipes and tubes)MFN 7.5%→0%72209021- Chromium typeMFN 7.5%→0%72209022- Nickel chromium austenitic typeMFN 7.5%→0%72209029- OtherMFN 7.5%→0%72209090OtherMFN 7.5%→0%
72221111- Chromium typeMFN 7.5%→0%72221112- Nickel chromium austenitic typeMFN 7.5%→0%72221119- OtherMFN 7.5%→0%72221191- Chromium typeMFN 7.5%→0%72221192- Nickel chromium austenitic typeMFN 7.5%→0%72221199- OtherMFN 7.5%→0%72221911- Chromium typeMFN 7.5%→0%72221912- Nickel chromium austenitic typeMFN 7.5%→0%72221919- OtherMFN 7.5%→0%72221991- Chromium typeMFN 7.5%→0%72221992- Nickel chromium austenitic typeMFN 7.5%→0%72221999- OtherMFN 7.5%→0%72222011- Chromium typeMFN 7.5%→0%72222012- Nickel chromium austenitic typeMFN 7.5%→0%72222019- OtherMFN 7.5%→0%72222091- Chromium typeMFN 7.5%→0%72222092- Nickel chromium austenitic typeMFN 7.5%→0%72222099- OtherMFN 7.5%→0%72223011- Chromium typeMFN 7.5%→0%72223012- Nickel chromium austenitic typeMFN 7.5%→0%72223019- OtherMFN 7.5%→0%72223091- Chromium typeMFN 7.5%→0%72223092- Nickel chromium austenitic typeMFN 7.5%→0%72223099- OtherMFN 7.5%→0%72224010Of thickness of 80 mm and aboveMFN 7.5%→0%72224020Of below 80 mmMFN 7.5%→0%
72251100Grain-orientedMFN 5%→0%72251910Hot rolledMFN 7.5%→0%72251920Cold rolledMFN 7.5%→0%72251990OtherMFN 7.5%→0%72253010Of spring steel qualityMFN 7.5%→0%72253090OtherMFN 7.5%→0%72254011- Boiler qualityMFN 7.5%→0%72254012- Pressure vessel qualityMFN 7.5%→0%72254013- High tensile qualityMFN 7.5%→0%72254019- OtherMFN 7.5%→0%72254020Of a thickness of 3 mm and above but not exceeding 4.75 mmMFN 7.5%→0%72254030Of a thickness of below 3 mmMFN 7.5%→0%72255010Of a thickness of less than 3 mmMFN 7.5%→0%72255020Of a thickness of 3 mm to 4.75 mmMFN 7.5%→0%72255030Of a thickness of above 4.75 mmMFN 7.5%→0%72259110GalvannealedMFN 7.5%→0%72259190OtherMFN 7.5%→0%72259210GalvannealedMFN 7.5%→0%72259290OtherMFN 7.5%→0%72259910plated or coated with aluminiumMFN 7.5%→0%72259920plated or coated with aluminium-zinc alloysMFN 7.5%→0%72259930painted, coloured or coated with plasticsMFN 7.5%→0%72259990OtherMFN 7.5%→0%
72261100Grain-orientedMFN 5%→0%72261910Hot rolledMFN 7.5%→0%72261920Cold rolledMFN 7.5%→0%72261990OtherMFN 7.5%→0%72262011- In coilsMFN 7.5%→0%72262012- OtherMFN 7.5%→0%72262021- In coilsMFN 7.5%→0%72262022- OtherMFN 7.5%→0%72262030Hoops and stripsMFN 7.5%→0%72269110Of a thickness of below 3 mmMFN 7.5%→0%72269120Of a thickness of 3 mm and above but not exceeding 4.75 mmMFN 7.5%→0%72269130High tensile quality of a thickness of above 4.75 mmMFN 7.5%→0%72269190OtherMFN 7.5%→0%72269210Of a thickness of below 3 mmMFN 7.5%→0%72269220Of a thickness of 3 mm and above but not exceeding 4.75 mmMFN 7.5%→0%72269230Of a thickness of above 4.75 mmMFN 7.5%→0%72269910Of a thickness of above 4.75 mmMFN 7.5%→0%72269920Of a thickness of above 3 mm and but not exceeding 4.75 mmMFN 7.5%→0%72269930Of a thickness of below 3 mmMFN 7.5%→0%72269940Skelp (strips for pipes and tubes)MFN 7.5%→0%72269951- Hot rolledMFN 7.5%→0%72269952- Cold rolledMFN 7.5%→0%72269953- Of spring steel, other than skelpMFN 7.5%→0%72269960Skelps and strips for razor blades and saw bladesMFN 7.5%→0%72269971plain and corrugatedMFN 7.5%→0%72269972electrolytically, plain and corrugatedMFN 7.5%→0%72269973GalvannealedMFN 7.5%→0%72269979OtherMFN 7.5%→0%72269981with aluminiumMFN 7.5%→0%72269982with aluminium-zinc alloysMFN 7.5%→0%72269983painted, coloured or coated with plasticsMFN 7.5%→0%72269989OtherMFN 7.5%→0%72269990OtherMFN 7.5%→0%
72271000Of high speed steelMFN 7.5%→0%72272000Of silico-manganese steelMFN 7.5%→0%72279010Valve spring steel qualityMFN 7.5%→0%72279020Other spring steel qualityMFN 7.5%→0%72279030Ball bearing qualityMFN 7.5%→0%72279040Cold heading qualityMFN 7.5%→0%72279050Lead-free cutting qualityMFN 7.5%→0%72279060Sulphur free cutting qualityMFN 7.5%→0%72279090OtherMFN 7.5%→0%
72281010Bright barsMFN 7.5%→0%72281090OtherMFN 7.5%→0%72282000Bars and rods, of silico-manganese steelMFN 7.5%→0%72283011- Of alloy tool steelMFN 7.5%→0%72283019- OtherMFN 7.5%→0%72283021- Lead bearing steelMFN 7.5%→0%72283022- Spring steelMFN 7.5%→0%72283023- Sulphur bearing steelMFN 7.5%→0%72283024- Tool and die steelMFN 7.5%→0%72283029- OtherMFN 7.5%→0%72284000Other bars and rods, not further worked than forgedMFN 7.5%→0%72285010Of engine valves and cold heading steelMFN 7.5%→0%72285090OtherMFN 7.5%→0%72286011- Of alloy tool steelMFN 7.5%→0%72286012- OtherMFN 7.5%→0%72286091- Lead bearing steelMFN 7.5%→0%72286092- Spring steelMFN 7.5%→0%72286093- Sulphur bearing steelMFN 7.5%→0%72286094- Tool and die steelMFN 7.5%→0%72286099- OtherMFN 7.5%→0%72287011- Of 80 mm or moreMFN 7.5%→0%72287012- Of less than 80 mm finished :MFN 7.5%→0%72287021- Of 80 mm or moreMFN 7.5%→0%72287022- Of less than 80 mmMFN 7.5%→0%72288010Of alloy steelMFN 7.5%→0%72288020Of non alloy steel, forgedMFN 7.5%→0%72288090OtherMFN 7.5%→0%
72292000Of silico-manganese steelMFN 7.5%→0%72299011- Tinned wireMFN 7.5%→0%72299012- Bronze coated wireMFN 7.5%→0%72299013- Trapezoidal wireMFN 7.5%→0%72299014- Half round wireMFN 7.5%→0%72299015- Crimped wireMFN 7.5%→0%72299016- Copper coated wire quality not insulated :MFN 7.5%→0%72299021- Electrode qualityMFN 7.5%→0%72299022- Wire rope qualityMFN 7.5%→0%72299023- ACSR quality tensile, hardened and tempered wires, not insulated :MFN 7.5%→0%72299031- Wire (excluding wire type lead)MFN 7.5%→0%72299032- Spring wireMFN 7.5%→0%72299033- High tensile wireMFN 7.5%→0%72299034- Hardened and tempered wireMFN 7.5%→0%72299040Other wireMFN 7.5%→0%72299051- Half roundMFN 7.5%→0%72299052- Flat and rectangularMFN 7.5%→0%72299053- 'L' shapeMFN 7.5%→0%72299054- 'Z' shapeMFN 7.5%→0%72299059- OtherMFN 7.5%→0%72299060Electric resistance wire (including electric resistance heating wire)MFN 7.5%→0%72299070Crimped wireMFN 7.5%→0%72299090Other EXEMPTION NOTIFICATIONS Exemption to inputs required for the manufacture of iron and steel intermediates when imported into India. [Notfn. No. 10/95-Cus. dt. 7.3.1995 as amended by Notfn. Nos. 101/95-Cus. dt. 26.5.1995, 143/95- Cus. dt. 19.5.1995, 157/95-Cus. dt. 9.11.1995, 23/96-Cus. dt. 15.6.1996, 05/22] As rescinded by 05/01.02.2022 Safeguard duty on Hot Rolled Flat Products of Stainless Steel-304 grade, Notifn. No. 1/2013-Customs (SG), dt. 4.1.2013. Whereas, in the matter of import of Hot Rolled Flat Products of Stainless Steel-304 grade classified within Chapter 72 of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) (hereinafter referred to as the Customs Tariff Act), the Director General (Safeguard), in its preliminary findings published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i), vide number G.S.R. 714 (E), dated the 24th September, 2012 and subsequent Corrigendum vide G.S.R. 825 (E) dated 12th November, 2012 and Corrigendum-2 vide G.S.R. 841 (E) dated 23rd November, 2012 had come to the conclusion that increased imports of Hot Rolled Flat Products of Stainless Steel - 304 grade (upto a maximum width of 1605 mm) and encompassing all austenitic grades having minimum Nickel (Ni) content of 6 per cent., compulsorily containing Chromium with or without the presence of other alloying elements like Molybdenum, Titanium etc., (hereinafter referred to as the subject goods) falling under sub-headings 72191111, 72191112, 72191190, 72191200, 72191300, 72191400, 72192111, 72192112, 72192121, 72192122, 72192131, 72192132,72192141, 72192142, 72192190, 72192211, 72192212, 72192219, 72192291, 72192292, 72192299, 72192310, 72192320, 72192390, 72192411, 72192412, 72192413, 72192419, 72192421, 72192422, 72192423, 72192429, 72192490, 72201110, 72201121, 72201122, 72201129, 72201190, 72201210, 72201221, 72201222, 72201229, 72201290 of the Customs Tariff Act, into India had caused and threatened to cause market disruption to the domestic industry comprising producers of the subject goods thereby necessitating the imposition of provisional safeguard duty on imports of the subject goods from the Peoples Republic of China into India; Now, therefore, in exercise of the powers conferred by sub-section (2) of section 8C of the said Act, read with rules 10 and 14 of the Customs Tariff (Transitional Product Specific Safeguard Duty) Rules, 2002, the Central Government after considering the said findings of the Director General (Safeguard), hereby imposes on Hot Rolled Flat Products of Stainless Steel -304 grade (upto a maximum width of 1605 mm), and encompassing all austenitic grades having minimum Nickel (Ni) content of 6 percent., compulsorily containing Chromium with or without the presence of other alloying elements like Molybdenum, Titanium etc., falling under tariff items 72191111, 72191112, 72191190, 72191200, 72191300, 72191400, 72192111, 72192112, 72192121, 72192122, 72192131, 72192132, 72192141, 72192142, 72192190, 72192211, 72192212, 72192219, 72192291, 72192292, 72192299, 72192310, 72192320, 72192390, 72192411, 72192412, 72192413, 72192419, 72192421, 72192422, 72192423, 72192429, 72192490, 72201110, 72201121, 72201122, 72201129, 72201190, 72201210, 72201221, 72201222, 72201229, 72201290 of the First Schedule to the Customs Tariff Act, when imported into India, from the People's Republic of China, a provisional safeguard duty at the rate of 20 percent. ad- valorem. 2. The safeguard duty imposed under this notification shall be effective for a period of 200 days (unless revoked, superseded or amended earlier) from the date of publication of this notification in the Official Gazette. Safeguard duty on Hot Rolled Flat Products of non-alloy and other alloy Steel in coils of a width of 600 mm or more: Notifn. No. 2/2015-Customs (SG), dt. 14.9.2015. Whereas, in the matter of import of "Hot-rolled flat products of non-alloy and other alloy Steel in coils of a width of 600 mm or more" (hereinafter referred to as the subject goods), falling under heading 7208 or tariff item 7225 30 90 of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) (hereinafter referred to as the Customs Tariff Act), the Director General (Safeguard), in his preliminary findings, published vide number G.S.R. 690 (E), dated the 9th September, 2015, in the Gazette of India, Extraordinary, Part II, Section 3, Subsection (i), dated the 9th September, 2015, has come to the conclusion that increased imports of subject goods into India has caused and threatened to cause serious injury to the domestic industry/producers of subject goods, and any delay in application for provisional Safeguard duty would cause damage which would be difficult to repair, necessitating the imposition of provisional safeguard duty on imports of subject goods into India, and accordingly has recommended the imposition of provisional safeguard duty on imports of the subject goods into India; Now, therefore, in exercise of the powers conferred by sub-section (2) of section 8B of the said Customs Tariff Act, read with rules 10 and 14 of the Customs Tariff (Identification and Assessment of Safeguard Duty) Rules, 1997, the Central Government after considering the said findings of the Director General (Safeguards), hereby imposes on subject goods falling under heading 7208 or tariff item 7225 30 90 of the First Schedule to the Customs Tariff Act, when imported into India, a provisional safeguard duty at the rate of twenty per cent. ad valorem. 2. The safeguard duty imposed under this notification shall be effective for a period of two hundred days (unless revoked, superseded or amended earlier) from the date of publication of this notification in the Official Gazette. Explanation: The following are not included in the scope of subject goods: a) Hot-rolled flat products of steel with nominal width less than 600mm; b) API grade steel; c) Silicon electrical steel; d) Hot-rolled flat products of steel of spring steel quality;"e) Hot-rolled flat products of steel which are electrolytically plated or coated with zinc; f) Hot-rolled flat products of steel otherwise plated or coated with zinc; and g) Hot-rolled flat products of stainless steel. Safeguard duty on Hot Rolled Flat Products of non-alloy and other alloy Steel in coils of a width of 600 mm or more: Notifn. No. 1/2016-Customs (SG), dt. 29.3.2016. Whereas, in the matter of import of "Hot-rolled flat products of non-alloy and other alloy Steel in coils of a width of 600 mm or more" (hereinafter referred to as the subject goods), falling under heading 7208 or tariff item 7225 30 90 of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) (hereinafter referred to as the Customs Tariff Act), the Director General (Safeguard), in his preliminary findings, published vide number G.S.R. 690 (E), dated the 9th September, 2015, in the Gazette of India, Extraordinary, Part II, Section 3, Subsection (i), dated the 9th September, 2015, had come to the conclusion that increased imports of subject goods into India has caused and threatened to cause serious injury to the domestic industry and producers of subject goods, thereby necessitating the imposition of provisional safeguard duty on imports of the subject goods into India; And whereas, on the basis of the aforesaid findings of the Director General (Safeguard), the Central Govern- ment has imposed provisional safeguard duty on import of the subject goods into India for a period of two hundred days with effect from the 14th day of September, 2015 vide notification of the Government of India in the Ministry of Finance (Department of Revenue), No. 2/2015-Customs (SG), dated the 14th September, 2015 published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i), vide number GSR 694 (E), dated the 14th September, 2015; And whereas, in the final findings vide number G.S.R. 308(E), dated the 15th March, 2016, published in theMFN 7.5%→0%
All tariff codes in Chapter 72
Flat index of every 8-digit tariff item in this chapter, grouped by 4-digit heading.
7201PIG IRON AND SPIEGELEISEN IN PIGS, BLOCKS OR OTHER PRIMARY FORMS
7202FERRO-ALLOYS
- 72021100Containing by weight more than 2% of carbon
- 72021900Other
- 72022100Containing by weight more than 55% of silicon
- 72022900Other
- 72023000Ferro-silico-manganese
- 72024100Containing by weight more than 4% of carbon
- 72024900Other
- 72025000Ferro-silico-chromium
- 72026000Ferro-nickel
- 72027000Ferro-molybdenum
- 72028000Ferro tungsten and ferro-silico-tungsten
- 72029100Ferro-titanium and Ferro-silico-titanium
- 72029200Ferro-vanadium
- 72029300Ferro-niobium
- 72029911- Ferro-phosphorus
- 72029912- Ferro-selenium
- 72029913- Ferro-cobalt
- 72029914- Ferro-columbium
- 72029915- Ferro-zirconium
- 72029916- Ferro-tantalum
- 72029921- Ferro-silico-zirconium
- 72029922- Ferro-silico-magnesium
- 72029931- Ferro-boron
- 72029932- Charge-chrome
- 72029990Other
7203FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE AND OTHER SPONGY FERROUS PRODUCTS, IN LUMPS, PELLETS OR SIMILAR FORMS; IRON HAVING MINIMUM PURITY BY WEIGHT OF 99.94%, IN LUMPS, PELLETS OR SIMILAR FORMS
7204FERROUS WASTE AND SCRAP; REMELTING SCRAP INGOTS OF IRON OR STEEL
- 72041000Waste and scrap of cast iron
- 72042110Empty or discharged cartridges of all bores and sizes
- 72042190Other
- 72042910Empty or discharged cartridges of all bores and sizes
- 72042920Of high speed steel
- 72042990Other
- 72043000Waste and scrap of tinned iron or steel
- 72044100Turnings, shavings, chips, milling waste, saw dust, fillings, trimmings and stampings, whether or not in bundles
- 72044900Other
- 72045000Remelting scrap ingots
7205GRANULES AND POWDERS, OF PIG IRON, SPIEGELEISEN, IRON OR STEEL
7206IRON AND NON-ALLOY STEEL IN INGOTS OR OTHER PRIMARY FORMS (EXCLUDING IRON OF HEADING 7203)
7207SEMI-FINISHED PRODUCTS OF IRON OR NON-ALLOY STEEL
- 72071110Electrical quality
- 72071120Forging quality
- 72071130Seamless steel tube quality
- 72071190Other
- 72071210Electrical quality
- 72071220Forging quality
- 72071230Seamless steel tube quality
- 72071290Other
- 72071910Forged blanks of non-alloy steel
- 72071920Mild steel billets
- 72071990Other
- 72072010Forging quality
- 72072020Spring steel quality
- 72072030Seamless steel tube quality
- 72072090Other
7208FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, HOT- ROLLED, NOT CLAD, PLATED OR COATED
- 72081000In coils, not further worked than hot-rolled, with patterns in relief rolled, pickled :
- 72082510Plates
- 72082520Universal plates
- 72082530Sheets
- 72082540Strip
- 72082590Other
- 72082610Plates
- 72082620Universal plates
- 72082630Sheets
- 72082640Strip
- 72082690Other
- 72082710Plates
- 72082720Universal plates
- 72082730Sheets
- 72082740Strip
- 72082790Other
- 72083610Plates
- 72083620Universal plates
- 72083630Sheets
- 72083640Strip
- 72083690Other
- 72083710Plates
- 72083720Universal plates
- 72083730Sheets
- 72083740Strip
- 72083790Other
- 72083810Plates
- 72083820Universal plates
- 72083830Sheets
- 72083840Strip
- 72083890Other
- 72083910Plates
- 72083920Universal plates
- 72083930Sheets
- 72083940Strip
- 72083990Other
- 72084010Plates
- 72084020Universal plates
- 72084030Sheets
- 72084040Strip
- 72084090Other hot-rolled :
- 72085110Plates
- 72085120Universal plates
- 72085130Sheets
- 72085140Strip
- 72085190Other
- 72085210Plates
- 72085220Universal plates
- 72085230Sheets
- 72085240Strip
- 72085290Other
- 72085310Plates
- 72085320Universal plates
- 72085330Sheets
- 72085340Strip
- 72085390Other
- 72085410Plates
- 72085420Universal plates Amended by Notn. No. 48/18
- 72085430Sheets
- 72085440Strip
- 72085490Other
- 72089000Other
7209FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, COLD- ROLLED (COLD-REDUCED), NOT CLAD, PLATED OR COATED (cold-reduced) :
- 72091510Plates
- 72091520Sheets
- 72091530Strip
- 72091590Other
- 72091610Plates
- 72091620Sheets
- 72091630Strip
- 72091690Other
- 72091710Plates
- 72091720Sheets
- 72091730Strip
- 72091790Other
- 72091810Plates
- 72091820Sheets
- 72091830Strip
- 72091890Other rolled (cold-reduced) :
- 72092510Plates
- 72092520Sheets
- 72092530Strip
- 72092590Other
- 72092610Plates
- 72092620Sheets
- 72092630Strip
- 72092690Other
- 72092710Plates
- 72092720Sheets
- 72092730Strip
- 72092790Other
- 72092810Plates
- 72092820Sheets
- 72092830Strip
- 72092890Other
- 72099000Other
7210FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, CLAD, PLATED OR COATED
- 72101110OTS/MR Type
- 72101190Other
- 72101210OTS/MR Type
- 72101290Other
- 72102000Plated or coated with lead, including terne-plate
- 72103010Corrugated
- 72103091Galvannealed
- 72103099Other
- 72104100Corrugated
- 72104910Galvannealed
- 72104990Other
- 72105000Plated or coated with chromium oxides or with chromium and chromium oxides
- 72106100Plated or coated with aluminium-zinc alloys
- 72106900Other
- 72107000Painted, varnished or coated with plastics
- 72109010Lacquered
- 72109090Other
7211FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM, NOT CLAD, PLATED OR COATED
- 72111300Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
- 72111410Flats
- 72111420Universal plates
- 72111430Hoops
- 72111440Sheets
- 72111450Strip
- 72111460Skelp
- 72111490Other
- 72111910Flats
- 72111920Universal plates
- 72111930Hoops
- 72111940Sheets
- 72111950Strip
- 72111960Skelp
- 72111990Other
- 72112310Flats
- 72112320Universal plates
- 72112330Hoops
- 72112340Sheets
- 72112350Strip
- 72112390Other
- 72112910Flats
- 72112920Universal plates
- 72112930Hoops
- 72112940Sheets
- 72112950Strip
- 72112960Skelp
- 72112990Other
- 72119011- Of boiler quality
- 72119012- Of high tensile quality
- 72119013- Of ship building quality
- 72119090Other
7212FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM, CLAD, PLATED OR COATED
- 72121010OTS or MR type
- 72121090Other
- 72122010Corrugated
- 72122090Other
- 72122091Galvannealed
- 72122099Other
- 72123010Corrugated
- 72123090Other
- 72123091Galvannealed
- 72123099Other
- 72124000Painted, varnished or coated with plastics
- 72125010Plated or coated with lead
- 72125020Lacquered
- 72125030plated or coated with aluminium
- 72125040plated or coated with aluminium-zinc alloys
- 72125090Other
- 72126000Clad
7213BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF IRON OR NON-ALLOY STEEL
7214OTHER BARS AND RODS OF IRON OR NON-ALLOY STEEL, NOT FURTHER WORKED THAN FORGED, HOT- ROLLED, HOT-DRAWN OR HOT-EXTRUDED, BUT INCLUDING THOSE TWISTED AFTER ROLLING
7215OTHER BARS AND RODS OF IRON OR NON-ALLOY STEEL
7216ANGLES, SHAPES AND SECTIONS OF IRON OR NON- ALLOY STEEL
- 72161000U, I or H sections, not further worked than hot- rolled,hot-drawn or extruded, of a height of less Amended by Notn. No. 48/18 than 80 mm rolled, hot-drawn or extruded, of a height of less than 80 mm :
- 72162100L sections
- 72162200T sections hot-rolled, hot-drawn or extruded of a height of 80 mm or more :
- 72163100U sections
- 72163200I sections
- 72163300H sections
- 72164000L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
- 72165000Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded worked than cold-formed or cold-finished :
- 72166100Obtained from flat-rolled products
- 72166900Other
- 72169100Cold-formed or cold-finished from flat rolled products
- 72169910Plated or coated with zinc
- 72169920Plated or coated with base metals other than zinc
- 72169930Slotted angles and slotted channels
- 72169940Forged
- 72169990Other
7217WIRE OF IRON OR NON-ALLOY STEEL
- 72171010Of a thickness of 18 SWG and below
- 72171020Of a thickness above 18 SWG but up to 26 SWG
- 72171030Of a thickness above 26 SWG
- 72172010Of a thickness of 18 SWG and below
- 72172020Of a thickness above 18 SWG but up to 26 SWG
- 72172030Of a thickness above 26 SWG
- 72173010Of a thickness of 18 SWG and below
- 72173020Of a thickness above 18 SWG but up to 26 SWG
- 72173030Of a thickness above 26 SWG
- 72179011- Of cross section - half round
- 72179012- Of cross section - flat and rectangular
- 72179013- Of cross section - 'z' shaped
- 72179019- Of cross section - other shapes
- 72179091- High tensile quality
- 72179092- Electrode quality
- 72179093- Electric resistance wire (including electric resistance heating wire)
- 72179099- Other III.-STAINLESS STEEL
7218STAINLESS STEEL IN INGOTS OR OTHER PRIMARY FORMS; SEMI-FINISHED PRODUCTS OF STAINLESS STEEL
7219FLAT-ROLLED PRODUCTS OF STAINLESS STEEL, OF A WIDTH OF 600 MM OR MORE
- 72191111- Not exceeding 14 mm
- 72191112- Exceeding 14 mm
- 72191190Other
- 72191200Of a thickness of 4.75 mm or more but not exceeding 10 mm
- 72191300Of a thickness of 3 mm or more but less than 4.75 mm
- 72191400Of a thickness of less than 3 mm
- 72192111- Not exceeding 14 mm
- 72192112- Exceeding 14 mm steel, nickel chromium austenitic type: Amended by Notn. No. 48/18
- 72192121- Not exceeding 14 mm
- 72192122- Exceeding 14 mm
- 72192131- Not exceeding 14 mm
- 72192132- Exceeding 14 mm
- 72192141- Not exceeding 14 mm
- 72192142- Exceeding 14 mm
- 72192190Other
- 72192211- Chromium type
- 72192212- Nickel chromium austenitic type
- 72192219- Other
- 72192291- Chromium type
- 72192292- Nickel chromium austenitic type
- 72192299- Other
- 72192310Chromium type
- 72192320Nickel chromium austenitic type
- 72192390Other
- 72192411- Below 0.35 mm
- 72192412- 0.35 mm and above but below 0.56 mm
- 72192413- 0.56 mm and above but below 0.90 mm
- 72192419- Other
- 72192421- Below 0.35 mm
- 72192422- 0.35 mm and above but below 0.56 mm
- 72192423- 0.56 mm and above but below 0.90 mm
- 72192429- Other
- 72192490Other
- 72193111- Not exceeding 14 mm
- 72193112- Exceeding 14 mm
- 72193121- Not exceeding 14 mm
- 72193122- Exceeding 14 mm
- 72193190Other
- 72193210Chromium type
- 72193220Nickel chromium austenitic type
- 72193290Other
- 72193310Chromium type
- 72193320Nickel chromium austenitic type
- 72193390Other
- 72193410Chromium type
- 72193420Nickel chromium austenitic type
- 72193490Other
- 72193510Chromium type
- 72193520Nickel chromium austenitic type
- 72193590Other
- 72199011- Thickness more than 4.75 mm
- 72199012- Thickness 3 mm to 4.75 mm
- 72199013- Thickness less than 3 mm
- 72199090Other
7220FLAT-ROLLED PRODUCTS OF STAINLESS STEEL, OF A WIDTH OF LESS THAN 600 MM
- 72201110Skelp for pipes and tubes
- 72201121- Chromium type
- 72201122- Nickel chromium austenitic type
- 72201129- Other
- 72201190Other
- 72201210Skelp for pipes and tubes
- 72201221- Chromium type
- 72201222- Nickel chromium austenitic type
- 72201229- Other
- 72201290Other
- 72202010Skelp for pipes and tubes Amended by Notn. No. 48/18
- 72202021- Chromium type
- 72202022- Nickel chromium austenitic type
- 72202029- Other
- 72202090Other
- 72209010Skelp (strips for pipes and tubes)
- 72209021- Chromium type
- 72209022- Nickel chromium austenitic type
- 72209029- Other
- 72209090Other
7221BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF STAINLESS STEEL
7222OTHER BARS AND RODS OF STAINLESS STEEL; ANGLES, SHAPES AND SECTIONS OF STAINLESS STEEL hot-drawn or extruded :
- 72221111- Chromium type
- 72221112- Nickel chromium austenitic type
- 72221119- Other
- 72221191- Chromium type
- 72221192- Nickel chromium austenitic type
- 72221199- Other
- 72221911- Chromium type
- 72221912- Nickel chromium austenitic type
- 72221919- Other
- 72221991- Chromium type
- 72221992- Nickel chromium austenitic type
- 72221999- Other
- 72222011- Chromium type
- 72222012- Nickel chromium austenitic type
- 72222019- Other
- 72222091- Chromium type
- 72222092- Nickel chromium austenitic type
- 72222099- Other
- 72223011- Chromium type
- 72223012- Nickel chromium austenitic type
- 72223019- Other
- 72223091- Chromium type
- 72223092- Nickel chromium austenitic type
- 72223099- Other
- 72224010Of thickness of 80 mm and above
- 72224020Of below 80 mm
7223WIRE OF STAINLESS STEEL
7224OTHER ALLOY STEEL IN INGOTS OR OTHER PRIMARY FORMS; SEMI-FINISHED PRODUCTS OF OTHER ALLOY STEEL
7225FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE
- 72251100Grain-oriented
- 72251910Hot rolled
- 72251920Cold rolled
- 72251990Other
- 72253010Of spring steel quality
- 72253090Other
- 72254011- Boiler quality
- 72254012- Pressure vessel quality
- 72254013- High tensile quality
- 72254019- Other
- 72254020Of a thickness of 3 mm and above but not exceeding 4.75 mm
- 72254030Of a thickness of below 3 mm
- 72255010Of a thickness of less than 3 mm
- 72255020Of a thickness of 3 mm to 4.75 mm
- 72255030Of a thickness of above 4.75 mm
- 72259110Galvannealed
- 72259190Other
- 72259210Galvannealed
- 72259290Other
- 72259910plated or coated with aluminium
- 72259920plated or coated with aluminium-zinc alloys
- 72259930painted, coloured or coated with plastics
- 72259990Other
7226FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM
- 72261100Grain-oriented
- 72261910Hot rolled
- 72261920Cold rolled
- 72261990Other
- 72262011- In coils
- 72262012- Other
- 72262021- In coils
- 72262022- Other
- 72262030Hoops and strips
- 72269110Of a thickness of below 3 mm
- 72269120Of a thickness of 3 mm and above but not exceeding 4.75 mm
- 72269130High tensile quality of a thickness of above 4.75 mm
- 72269190Other
- 72269210Of a thickness of below 3 mm
- 72269220Of a thickness of 3 mm and above but not exceeding 4.75 mm
- 72269230Of a thickness of above 4.75 mm
- 72269910Of a thickness of above 4.75 mm
- 72269920Of a thickness of above 3 mm and but not exceeding 4.75 mm
- 72269930Of a thickness of below 3 mm
- 72269940Skelp (strips for pipes and tubes)
- 72269951- Hot rolled
- 72269952- Cold rolled
- 72269953- Of spring steel, other than skelp
- 72269960Skelps and strips for razor blades and saw blades
- 72269971plain and corrugated
- 72269972electrolytically, plain and corrugated
- 72269973Galvannealed
- 72269979Other
- 72269981with aluminium
- 72269982with aluminium-zinc alloys
- 72269983painted, coloured or coated with plastics
- 72269989Other
- 72269990Other
7227BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF OTHER ALLOY STEEL
7228OTHER BARS AND RODS OF OTHER ALLOY STEEL; ANGLES, SHAPES AND SECTIONS, OF OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL
- 72281010Bright bars
- 72281090Other
- 72282000Bars and rods, of silico-manganese steel
- 72283011- Of alloy tool steel
- 72283019- Other
- 72283021- Lead bearing steel
- 72283022- Spring steel
- 72283023- Sulphur bearing steel
- 72283024- Tool and die steel
- 72283029- Other
- 72284000Other bars and rods, not further worked than forged
- 72285010Of engine valves and cold heading steel
- 72285090Other
- 72286011- Of alloy tool steel
- 72286012- Other
- 72286091- Lead bearing steel
- 72286092- Spring steel
- 72286093- Sulphur bearing steel
- 72286094- Tool and die steel
- 72286099- Other
- 72287011- Of 80 mm or more
- 72287012- Of less than 80 mm finished :
- 72287021- Of 80 mm or more
- 72287022- Of less than 80 mm
- 72288010Of alloy steel
- 72288020Of non alloy steel, forged
- 72288090Other
7229WIRE OF OTHER ALLOY STEEL
- 72292000Of silico-manganese steel
- 72299011- Tinned wire
- 72299012- Bronze coated wire
- 72299013- Trapezoidal wire
- 72299014- Half round wire
- 72299015- Crimped wire
- 72299016- Copper coated wire quality not insulated :
- 72299021- Electrode quality
- 72299022- Wire rope quality
- 72299023- ACSR quality tensile, hardened and tempered wires, not insulated :
- 72299031- Wire (excluding wire type lead)
- 72299032- Spring wire
- 72299033- High tensile wire
- 72299034- Hardened and tempered wire
- 72299040Other wire
- 72299051- Half round
- 72299052- Flat and rectangular
- 72299053- 'L' shape
- 72299054- 'Z' shape
- 72299059- Other
- 72299060Electric resistance wire (including electric resistance heating wire)
- 72299070Crimped wire
- 72299090Other EXEMPTION NOTIFICATIONS Exemption to inputs required for the manufacture of iron and steel intermediates when imported into India. [Notfn. No. 10/95-Cus. dt. 7.3.1995 as amended by Notfn. Nos. 101/95-Cus. dt. 26.5.1995, 143/95- Cus. dt. 19.5.1995, 157/95-Cus. dt. 9.11.1995, 23/96-Cus. dt. 15.6.1996, 05/22] As rescinded by 05/01.02.2022 Safeguard duty on Hot Rolled Flat Products of Stainless Steel-304 grade, Notifn. No. 1/2013-Customs (SG), dt. 4.1.2013. Whereas, in the matter of import of Hot Rolled Flat Products of Stainless Steel-304 grade classified within Chapter 72 of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) (hereinafter referred to as the Customs Tariff Act), the Director General (Safeguard), in its preliminary findings published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i), vide number G.S.R. 714 (E), dated the 24th September, 2012 and subsequent Corrigendum vide G.S.R. 825 (E) dated 12th November, 2012 and Corrigendum-2 vide G.S.R. 841 (E) dated 23rd November, 2012 had come to the conclusion that increased imports of Hot Rolled Flat Products of Stainless Steel - 304 grade (upto a maximum width of 1605 mm) and encompassing all austenitic grades having minimum Nickel (Ni) content of 6 per cent., compulsorily containing Chromium with or without the presence of other alloying elements like Molybdenum, Titanium etc., (hereinafter referred to as the subject goods) falling under sub-headings 72191111, 72191112, 72191190, 72191200, 72191300, 72191400, 72192111, 72192112, 72192121, 72192122, 72192131, 72192132,72192141, 72192142, 72192190, 72192211, 72192212, 72192219, 72192291, 72192292, 72192299, 72192310, 72192320, 72192390, 72192411, 72192412, 72192413, 72192419, 72192421, 72192422, 72192423, 72192429, 72192490, 72201110, 72201121, 72201122, 72201129, 72201190, 72201210, 72201221, 72201222, 72201229, 72201290 of the Customs Tariff Act, into India had caused and threatened to cause market disruption to the domestic industry comprising producers of the subject goods thereby necessitating the imposition of provisional safeguard duty on imports of the subject goods from the Peoples Republic of China into India; Now, therefore, in exercise of the powers conferred by sub-section (2) of section 8C of the said Act, read with rules 10 and 14 of the Customs Tariff (Transitional Product Specific Safeguard Duty) Rules, 2002, the Central Government after considering the said findings of the Director General (Safeguard), hereby imposes on Hot Rolled Flat Products of Stainless Steel -304 grade (upto a maximum width of 1605 mm), and encompassing all austenitic grades having minimum Nickel (Ni) content of 6 percent., compulsorily containing Chromium with or without the presence of other alloying elements like Molybdenum, Titanium etc., falling under tariff items 72191111, 72191112, 72191190, 72191200, 72191300, 72191400, 72192111, 72192112, 72192121, 72192122, 72192131, 72192132, 72192141, 72192142, 72192190, 72192211, 72192212, 72192219, 72192291, 72192292, 72192299, 72192310, 72192320, 72192390, 72192411, 72192412, 72192413, 72192419, 72192421, 72192422, 72192423, 72192429, 72192490, 72201110, 72201121, 72201122, 72201129, 72201190, 72201210, 72201221, 72201222, 72201229, 72201290 of the First Schedule to the Customs Tariff Act, when imported into India, from the People's Republic of China, a provisional safeguard duty at the rate of 20 percent. ad- valorem. 2. The safeguard duty imposed under this notification shall be effective for a period of 200 days (unless revoked, superseded or amended earlier) from the date of publication of this notification in the Official Gazette. Safeguard duty on Hot Rolled Flat Products of non-alloy and other alloy Steel in coils of a width of 600 mm or more: Notifn. No. 2/2015-Customs (SG), dt. 14.9.2015. Whereas, in the matter of import of "Hot-rolled flat products of non-alloy and other alloy Steel in coils of a width of 600 mm or more" (hereinafter referred to as the subject goods), falling under heading 7208 or tariff item 7225 30 90 of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) (hereinafter referred to as the Customs Tariff Act), the Director General (Safeguard), in his preliminary findings, published vide number G.S.R. 690 (E), dated the 9th September, 2015, in the Gazette of India, Extraordinary, Part II, Section 3, Subsection (i), dated the 9th September, 2015, has come to the conclusion that increased imports of subject goods into India has caused and threatened to cause serious injury to the domestic industry/producers of subject goods, and any delay in application for provisional Safeguard duty would cause damage which would be difficult to repair, necessitating the imposition of provisional safeguard duty on imports of subject goods into India, and accordingly has recommended the imposition of provisional safeguard duty on imports of the subject goods into India; Now, therefore, in exercise of the powers conferred by sub-section (2) of section 8B of the said Customs Tariff Act, read with rules 10 and 14 of the Customs Tariff (Identification and Assessment of Safeguard Duty) Rules, 1997, the Central Government after considering the said findings of the Director General (Safeguards), hereby imposes on subject goods falling under heading 7208 or tariff item 7225 30 90 of the First Schedule to the Customs Tariff Act, when imported into India, a provisional safeguard duty at the rate of twenty per cent. ad valorem. 2. The safeguard duty imposed under this notification shall be effective for a period of two hundred days (unless revoked, superseded or amended earlier) from the date of publication of this notification in the Official Gazette. Explanation: The following are not included in the scope of subject goods: a) Hot-rolled flat products of steel with nominal width less than 600mm; b) API grade steel; c) Silicon electrical steel; d) Hot-rolled flat products of steel of spring steel quality;"e) Hot-rolled flat products of steel which are electrolytically plated or coated with zinc; f) Hot-rolled flat products of steel otherwise plated or coated with zinc; and g) Hot-rolled flat products of stainless steel. Safeguard duty on Hot Rolled Flat Products of non-alloy and other alloy Steel in coils of a width of 600 mm or more: Notifn. No. 1/2016-Customs (SG), dt. 29.3.2016. Whereas, in the matter of import of "Hot-rolled flat products of non-alloy and other alloy Steel in coils of a width of 600 mm or more" (hereinafter referred to as the subject goods), falling under heading 7208 or tariff item 7225 30 90 of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) (hereinafter referred to as the Customs Tariff Act), the Director General (Safeguard), in his preliminary findings, published vide number G.S.R. 690 (E), dated the 9th September, 2015, in the Gazette of India, Extraordinary, Part II, Section 3, Subsection (i), dated the 9th September, 2015, had come to the conclusion that increased imports of subject goods into India has caused and threatened to cause serious injury to the domestic industry and producers of subject goods, thereby necessitating the imposition of provisional safeguard duty on imports of the subject goods into India; And whereas, on the basis of the aforesaid findings of the Director General (Safeguard), the Central Govern- ment has imposed provisional safeguard duty on import of the subject goods into India for a period of two hundred days with effect from the 14th day of September, 2015 vide notification of the Government of India in the Ministry of Finance (Department of Revenue), No. 2/2015-Customs (SG), dated the 14th September, 2015 published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i), vide number GSR 694 (E), dated the 14th September, 2015; And whereas, in the final findings vide number G.S.R. 308(E), dated the 15th March, 2016, published in the
Using HSN codes from Chapter 72
- Expand a heading to see every 6-digit subheading and 8-digit tariff item underneath. Unit of measure and standard duty are shown once per 4-digit heading.
- The standard duty shown is the Most-Favoured-Nation (MFN) rate from the Indian Customs Tariff.
- For GST filings, the 4-digit heading is usually sufficient; for customs declarations, the full 8-digit tariff item is required.
Related EximPe tools
Free, no signup — same trade-and-payments toolset your team uses to move money across borders.
SWIFT Code Finder
Verify SWIFT/BIC codes for global bank transfers. By country, city, or bank.
Open toolCurrency Converter
Live mid-market FX rates for 150+ currencies. Inbound INR conversions for exporters.
Open toolInvoice Generator
Build a cross-border invoice in minutes. Edit fields inline, export to PDF.
Open tool