Skip to main content

Indian ITC-HS · Section XV

Chapter 74

Copper and articles thereof

16 Headings47 Subheadings94 Tariff Items
Source: CBIC Part II Import Tariff, chapter-wise PDFs·Indian Customs Tariff — First Schedule (as on 30.06.2024, CBIC)
Section XV
BASE METALS AND ARTICLES OF BASE METAL
Showing each item's best available FTA rate beside its MFN baseline.

Headings, subheadings & tariff items

|

All tariff codes in Chapter 74

Flat index of every 8-digit tariff item in this chapter, grouped by 4-digit heading.

7401COPPER MATTES; CEMENT COPPER (PRECIPITATED COPPER)

7402UNREFINED COPPER; COPPER ANODES FOR ELECTROLYTIC REFINING

7403REFINED COPPER AND COPPER ALLOYS, UNWROUGHT

7404COPPER WASTE AND SCRAP

  • 74040011- Empty or discharged cartridges of all bores and sizes
  • 74040012- Copper scrap, namely the following : copper wire scrap covered by ISRI code words Barley, Berry and Birch; heavy copper scrap covered by ISRI code word Candy;unalloyed copper scrap covered by ISRI code word Cliff; copper wire nodules scrap covered by ISRI code words Clove, Cobra and Cocoa; light copper scrap covered by ISRI Code word Dream; muntz metal tubes covered by ISRI code word Palms; Miscellaneous copper-containing skimming, grindings, ashes, irony brass and copper, residues and slags covered by ISRI code word 'Drove' Copper wire scrap with various types of insultation covered by ISRI code word 'Druid'
  • 74040019- Other
  • 74040021- Empty or discharged cartridges of all bores and sizes, including the following: clean fired 70/30 brass shells free of bullets, iron and any other foreign material covered by ISRI code word 'Lake'; clean muffled (popped) 70/30 brass shells free of bullets, iron and any other foreign material covered by ISRI code word 'Lamb'
  • 74040022- Brass scrap, namely the following : refinery brass scrap covered by ISRI code word Drink; composition of red brass scrap covered by ISRI code word Ebony; red brass composition turnings scrap covered by ISRI code word Enerv; genuine babbit-lined brass bushings scrap covered by ISRI code word Elder; machinery or hard brass solids scrap covered by ISRI code word Engel; machinery or hand brass solids scrap covered by ISRI code word Erin; cocks and faucets scrap covered by ISRI code word Grape; yellow brass scrap covered by ISRI code word Honey; yellow brass castings covered by ISRI code word Ivory; new brass clippings covered by ISRI code word Label; yellow brass primer covered by ISRI code word Lark; brass pipe covered by ISRI code word Melon; yellow brass rod turnings covered by ISRI code word Night;new yellow brass rod ends covered by ISRI code word Noble; yellow brass turnings covered by ISRI code word Nomad; mixed unsweated auto radiators covered by ISRI code word Ocean; a dmiralty brass condenser tubes covered by ISRI code word Pales; aluminium brass condenser tubes covered by ISRI code word Pallu;
  • 74040024- Bronze scrap, including the following:manganese bronze solids covered ISRI code word 'Parch'; High lead bronze solids and borings covered by ISRI code word 'Elias'
  • 74040025- Copper nickel scrap, including the following: new cupro nickel clips and solids covered by ISRI code word 'Dandy'; cupro nickel solids covered by ISRI code word 'Daunt'; soldered cupro-nickel solids covered by ISRI code word 'Delta'; cupro nickel spinnings, turnings, borings covered by ISRI code word 'Decoy';
  • 74040029- Other

7406COPPER POWDERS AND FLAKES

  • 74061000Powders of non-lamellar structure
  • 74062000Powders of lamellar structure; flakes

7407COPPER BARS, RODS AND PROFILES

7408COPPER WIRE

7409COPPER PLATES, SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0.12.5 MM

7410COPPER FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.12.5 MM

7411COPPER TUBES AND PIPES

  • 74111000Of refined copper
  • 74112100Of copper-zinc base alloys (brass)
  • 74112200Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
  • 74112900Other

7412COPPER TUBE OR PIPE FITTINGS (FOR EXAMPLE, COUPLINGS, ELBOWS, SLEEVES)

7415NAILS, TACKS, DRAWING PINS, STAPLES (OTHER THAN THOSE OF HEADING 8305) AND SIMILAR ARTICLES, OF COPPER OR OF IRON OR STEEL WITH HEADS OF COPPER; SCREWS, BOLTS, NUTS, SCREW HOOKS, RIVETS, COTTERS, COTTER-PINS, WASHERS (INCLUDING SPRING WASHERS) AND SIMILAR ARTICLES, OF COPPER

7418TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES AND PARTS THEREOF, OF COPPER; POT SCOURERS AND SCOURING OR POLISHING PADS, GLOVES AND THE LIKE, OF COPPER; SANITARY WARE AND PARTS THEREOF, OF COPPER

7419OTHER ARTICLES OF COPPER

  • 74192000Cast, moulded, stamped or forged, but not further worked
  • 74198010Reservoirs, tanks, vats and similar containers
  • 74198020Articles of copper alloys electro-plated with nickel-silver
  • 74198030Articles of brass
  • 74198040Copper worked articles
  • 74198050Copper chain
  • 74198090Other articles of copper EXEMPTION NOTIFICATIONS Exemption to copper cathodes, wire bars and wire rods. [Notfn. No. 24/01-Cus. dt. 1.3.2001] In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962), read with sub-section (6) of section 3 and sub-section (1) of section 3A of the Customs Tariff Act, 1975 ( 51 of 1975) and in supersession of the notification of the Government of India in the Ministry of Finance (Department of Revenue), No. 127/2000-Customs, dated the 5th October, 2000, published in the Gazette of India vide number G.S.R. 771 (E), dated the 5th October, 2000, except as respects things done or omitted to be done before such superesssion, the Central Government, being satisfied that it is necessary in the public interest so to do, hereby exempts copper cathodes, wire bars and wire rods falling under Chapter 74 of the First Schedule to the said Customs Tariff Act and produced out of copper reverts, the said copper reverts having been exported out of India for toll smelting or toll processing, when imported into India,- (a) from so much of duty of customs leviable thereon which is specified in the said First Schedule, (b) from so much of additional duty leviable thereon under sub-section (1) of section 3 of the said Customs Tariff Act, and (c) from so much of special additional duty leviable thereon under sub-section (1) of section 3A of the said Customs Tariff Act, as is in excess of the duties which would be leviable if the value of the said goods were equal to the aggregate of - (1) the toll smelting or toll processing costs, as the case may be, that is to say, - (i) labour charges, (ii) cost of material (other than the cost of the goods exported out of India) used in such toll smelting or toll processing, and (iii) any other charges which are payable in connection with the toll smelting or toll processing abroad; and (2) the insurance and freight charges both ways, subject to the following conditions, namely :- (I) the copper cathodes, wire bars or wire rods, as the case may be, are imported within one year of the date of export of copper reverts out of India; and (II) sufficient evidence is shown that the copper cathodes, wire bars or wire rods, as the case may be, which are imported, have in fact been obtained out of toll smelting or toll processing of the copper reverts exported out of India. 1[2. Nothing contained in this notification shall have effect after the 31st March, 2026.] 1 Inserted by Notification No. 38/2024, dated 23.07.2024.

Using HSN codes from Chapter 74

  • Expand a heading to see every 6-digit subheading and 8-digit tariff item underneath. Unit of measure and standard duty are shown once per 4-digit heading.
  • The standard duty shown is the Most-Favoured-Nation (MFN) rate from the Indian Customs Tariff.
  • For GST filings, the 4-digit heading is usually sufficient; for customs declarations, the full 8-digit tariff item is required.

Related EximPe tools

Free, no signup — same trade-and-payments toolset your team uses to move money across borders.