Indian ITC-HS · Tariff Item (8-digit)
HSN / HS Code 74198050Copper chain
Why might this GST rate differ?
This is the base GST / IGST rate for the heading. The actual rate can vary with the product’s composition, form, packaging or end use — some sub-items attract a different rate under the schedules and exemptions of Notification 09/2025-Integrated Tax (Rate). Always verify the exact item before filing.
HSN code 74198050 covers Copper chain. GST / IGST is 18%. Basic Customs Duty is 10%. Total effective import duty is about 32.28% on an assessable value of ₹100 (CIF).
Heading 7419: OTHER ARTICLES OF COPPER
Copper chain
Importing this at the standard rate costs ≈ ₹32.28 in duty for every ₹100 of shipment value.
What will my shipment cost to land?
Enter your actual shipment value and where you're buying from. We compute the duty on top — the same stack customs applies at the port. Figures are indicative; verify on ICEGATE before filing.
Compliance at a glance
Effective import duty stack
Live values from India's ICEGATE customs calculator, computed on an assessable value of ₹100.
Unit of measure: kg.
| Component | Rate | Amount / ₹100 |
|---|---|---|
BCDBasic Customs Duty — the headline tariff rate from the First Schedule. | 10% | ₹10.00 |
AIDCAgriculture Infrastructure & Development Cess — calculated on BCD. | 10% | ₹1.00 |
SWSSocial Welfare Surcharge — calculated on (BCD + AIDC). | 10% | ₹1.10 |
IGSTIntegrated Goods and Services Tax — on (CIF + BCD + AIDC + SWS). | 18% | ₹20.18 |
| Total Duty | 32.28% | ≈ ₹32.28 / ₹100 CIF |
For an assessable value of ₹100:
- BCD = AV × 10% = ₹10.00
- AIDC = BCD × 10% = ₹1.00
- SWS = (BCD + AIDC) × 10% = ₹1.10(exemption notifications exist for this code; verify eligibility)
- IGST = (AV + BCD + AIDC + SWS) × 18% = ₹20.18
- Total Duty = BCD + AIDC + SWS + IGST = ₹32.28 (32.28%)
Notifications and exemptions can lower the effective rate for specific goods or FTA partner countries. Cross-check against the latest CBIC circulars before filing.
Where to source to pay less
Basic Customs Duty under each Free Trade Agreement, sorted by best rate. Other duties (AIDC, SWS, IGST) still apply on top.
- ASEAN countriesBest rate0%save 10pp
- Japan0%save 10pp
- Least Developed Countries0%save 10pp
- Malaysia0%save 10pp
- Philippines0%save 10pp
- SAFTA (LDC) countries0%save 10pp
- Sri Lanka0%save 10pp
- The Republic of Korea0%save 10pp
- United Arab Emirates0%save 10pp
- Chile2%save 8pp
- SAFTA countries5%save 5pp
- MFN — no FTA (baseline)10%standard rate
Source: ITC MACMAP. Eligibility depends on Rules of Origin — consult the relevant FTA notification before filing.
Ask AI about this code
Answers are grounded in the official tariff data shown on this page.
AI-generated from official tariff data on this page, and may use web search for added context. Indicative only — verify duties and compliance against the latest CBIC/DGFT notifications before importing.
Where this code sits
- 1
- 274198050Tariff Item (8-digit)Copper chain
Other HSN codes in heading 7419
Related 8-digit tariff items you may be looking for instead.
- 74198010Reservoirs, tanks, vats and similar containers
- 74198020Articles of copper alloys electro-plated with nickel-silver
- 74198030Articles of brass
- 74198040Copper worked articles
- 74198090Other articles of copper EXEMPTION NOTIFICATIONS Exemption to copper cathodes, wire bars and wire rods. [Notfn. No. 24/01-Cus. dt. 1.3.2001] In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962), read with sub-section (6) of section 3 and sub-section (1) of section 3A of the Customs Tariff Act, 1975 ( 51 of 1975) and in supersession of the notification of the Government of India in the Ministry of Finance (Department of Revenue), No. 127/2000-Customs, dated the 5th October, 2000, published in the Gazette of India vide number G.S.R. 771 (E), dated the 5th October, 2000, except as respects things done or omitted to be done before such superesssion, the Central Government, being satisfied that it is necessary in the public interest so to do, hereby exempts copper cathodes, wire bars and wire rods falling under Chapter 74 of the First Schedule to the said Customs Tariff Act and produced out of copper reverts, the said copper reverts having been exported out of India for toll smelting or toll processing, when imported into India,- (a) from so much of duty of customs leviable thereon which is specified in the said First Schedule, (b) from so much of additional duty leviable thereon under sub-section (1) of section 3 of the said Customs Tariff Act, and (c) from so much of special additional duty leviable thereon under sub-section (1) of section 3A of the said Customs Tariff Act, as is in excess of the duties which would be leviable if the value of the said goods were equal to the aggregate of - (1) the toll smelting or toll processing costs, as the case may be, that is to say, - (i) labour charges, (ii) cost of material (other than the cost of the goods exported out of India) used in such toll smelting or toll processing, and (iii) any other charges which are payable in connection with the toll smelting or toll processing abroad; and (2) the insurance and freight charges both ways, subject to the following conditions, namely :- (I) the copper cathodes, wire bars or wire rods, as the case may be, are imported within one year of the date of export of copper reverts out of India; and (II) sufficient evidence is shown that the copper cathodes, wire bars or wire rods, as the case may be, which are imported, have in fact been obtained out of toll smelting or toll processing of the copper reverts exported out of India. 1[2. Nothing contained in this notification shall have effect after the 31st March, 2026.] 1 Inserted by Notification No. 38/2024, dated 23.07.2024.
- 74192000Cast, moulded, stamped or forged, but not further worked
What is an HSN Code?
An HSN code (Harmonized System of Nomenclature) is an internationally standardised numeric system to classify traded products. Indian customs extend it to an 8-digit ITC-HS code for more precise classification, taxation and compliance.
- First 2 digits: Chapter (e.g. 74)
- Digits 3–4: Heading
- Digits 5–6: Subheading (WCO-aligned)
- Last 2 digits: Indian ITC extension for added granularity
Why is the right HSN code important?
- Ensures correct calculation of customs duties and taxes.
- Required for shipping bills, bills of entry, GST filings and FTA certificates of origin.
- Helps avoid clearance delays, penalties or reclassification disputes.
How to use this HSN code
Export Documentation
Use this code in your Commercial Invoice, Packing List, and Shipping Bill for exports from India.
Import Clearance
Required for the Bill of Entry and customs clearance when importing goods into India.
GST Classification
Drives the applicable GST rate, HSN-wise summary in GSTR-1 and ITC eligibility checks.
Common HSN code mistakes to avoid
- • Reusing outdated or incorrect codes from old shipments
- • Mixing up similar product codes without checking descriptions
- • Ignoring the last 2 digits which affect Indian duty rates
- • Not considering composition, end use or manufacturing process
- • Relying solely on online tools without professional verification
Need more information?
For complex products, consult with customs brokers or trade experts who can classify based on:
- • Physical product inspection
- • Material composition / manufacturing process
- • Intended end-use
- • Latest customs notifications & advance rulings
Additional Resources
• DGFT Policy: Guidelines for export-import procedures
• Customs Tariff: Complete HSN code list with duty rates
• GST Notifications: Latest tax-rate updates
• Trade Portal: Government trade documentation support
Related EximPe tools
Free, no signup — same trade-and-payments toolset your team uses to move money across borders.
Import Duty Calculator
BCD, IGST, cess and total landed cost for any HSN code — MFN and FTA rates.
Open toolSWIFT Code Finder
Verify SWIFT/BIC codes for global bank transfers. By country, city, or bank.
Open toolCurrency Converter
Live mid-market FX rates for 150+ currencies. Inbound INR conversions for exporters.
Open toolInvoice Generator
Build a cross-border invoice in minutes. Edit fields inline, export to PDF.
Open toolHSN Code 74198050 — FAQs
Duty, GST and classification questions answered from the official Customs Tariff data.
HSN code 74198050 (Copper chain) attracts 18% IGST under Schedule II of the GST notification.
The Basic Customs Duty (BCD) for HSN code 74198050 is 10%. On import, the landed duty also adds Social Welfare Surcharge (on BCD) and IGST (on the duty-inclusive value).
HSN code 74198050 covers Copper chain. It sits under Chapter 74 – Copper and articles thereof, in Section XV – BASE METALS AND ARTICLES OF BASE METAL.
The HSN code for Copper chain is 74198050, classified under Chapter 74 – Copper and articles thereof of India's Customs Tariff (ITC-HS).
The standard unit of quantity (UQC) for HSN code 74198050 is kg, as listed in the Customs Tariff.
Still have questions? Our support team is here to help 24/7.