Indian ITC-HS · Tariff Item (8-digit)
HSN / HS Code 76169910Expanded metal of aluminium and aluminium alloys
Why might this GST rate differ?
This is the base GST / IGST rate for the heading. The actual rate can vary with the product’s composition, form, packaging or end use — some sub-items attract a different rate under the schedules and exemptions of Notification 09/2025-Integrated Tax (Rate). Always verify the exact item before filing.
HSN code 76169910 covers Expanded metal of aluminium and aluminium alloys. GST / IGST is 18%. Basic Customs Duty is 10%. Total effective import duty is about 32.28% on an assessable value of ₹100 (CIF).
Heading 7616: OTHER ARTICLES OF ALUMINIUM
Expanded metal of aluminium and aluminium alloys
Importing this at the standard rate costs ≈ ₹32.28 in duty for every ₹100 of shipment value.
What will my shipment cost to land?
Enter your actual shipment value and where you're buying from. We compute the duty on top — the same stack customs applies at the port. Figures are indicative; verify on ICEGATE before filing.
Compliance at a glance
Effective import duty stack
Live values from India's ICEGATE customs calculator, computed on an assessable value of ₹100.
Unit of measure: kg.
| Component | Rate | Amount / ₹100 |
|---|---|---|
BCDBasic Customs Duty — the headline tariff rate from the First Schedule. | 10% | ₹10.00 |
AIDCAgriculture Infrastructure & Development Cess — calculated on BCD. | 10% | ₹1.00 |
SWSSocial Welfare Surcharge — calculated on (BCD + AIDC). | 10% | ₹1.10 |
IGSTIntegrated Goods and Services Tax — on (CIF + BCD + AIDC + SWS). | 18% | ₹20.18 |
| Total Duty | 32.28% | ≈ ₹32.28 / ₹100 CIF |
For an assessable value of ₹100:
- BCD = AV × 10% = ₹10.00
- AIDC = BCD × 10% = ₹1.00
- SWS = (BCD + AIDC) × 10% = ₹1.10(exemption notifications exist for this code; verify eligibility)
- IGST = (AV + BCD + AIDC + SWS) × 18% = ₹20.18
- Total Duty = BCD + AIDC + SWS + IGST = ₹32.28 (32.28%)
Notifications and exemptions can lower the effective rate for specific goods or FTA partner countries. Cross-check against the latest CBIC circulars before filing.
Where to source to pay less
Basic Customs Duty under each Free Trade Agreement, sorted by best rate. Other duties (AIDC, SWS, IGST) still apply on top.
- ASEAN countriesBest rate0%save 10pp
- Japan0%save 10pp
- Least Developed Countries0%save 10pp
- Malaysia0%save 10pp
- Nepal0%save 10pp
- Philippines0%save 10pp
- SAFTA (LDC) countries0%save 10pp
- Singapore0%save 10pp
- Sri Lanka0%save 10pp
- The Republic of Korea0%save 10pp
- United Arab Emirates4%save 6pp
- SAFTA countries5%save 5pp
- Australia7.1%save 2.9pp
- MFN — no FTA (baseline)10%standard rate
Source: ITC MACMAP. Eligibility depends on Rules of Origin — consult the relevant FTA notification before filing.
Ask AI about this code
Answers are grounded in the official tariff data shown on this page.
AI-generated from official tariff data on this page, and may use web search for added context. Indicative only — verify duties and compliance against the latest CBIC/DGFT notifications before importing.
Where this code sits
- 1
- 276169910Tariff Item (8-digit)Expanded metal of aluminium and aluminium alloys
Other HSN codes in heading 7616
Related 8-digit tariff items you may be looking for instead.
- 76169920Chains
- 76169930Bobbins
- 76169990Other [Notfn. No. 26/09-Cus., dt.23.3.2009] Whereas, in the matter of import of all goods falling under tariff heading 7606 (Aluminium Flat Rolled Products) and all goods falling under tariff heading 7607 (Aluminium Foil), respectively of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) (hereinafter referred to as the said Act), from People's Republic of China, the Director General (Safeguard), in preliminary findings vide number G.S.R. 65 (E), dated the 2nd February, 2009, published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i), dated the 2nd February, 2009, had come to the conclusion that increased imports of Aluminium Flat Rolled Products and Aluminium Foil into India from People's Republic of China had caused and threatened to cause market disruption to domestic industry of Aluminium Flat Rolled Products and Aluminium Foil and it necessitates the imposition of provisional safeguard duty on imports of Aluminium Flat Rolled Products and Aluminium Foil into India from People's Republic of China ; Now, therefore, in exercise of the powers conferred by sub-section (2) of section 8C of the said Act, read with rules 10 and 14 of the Customs Tariff (Transitional Product Specific Safeguard Duty) Rules, 2002, the Central Government after considering the said findings of the Director General (Safeguard), hereby imposes a safeguard duty:- a) at the rate of 21 per cent. ad valorem on all goods falling under heading 7606 (Aluminium Flat Rolled Products) of the First Schedule to the said Act, when imported into India from People's Republic of China; and b) at the rate of 35 per cent. ad valorem on all goods falling under heading 7607 (Aluminium Foil) of the First Schedule to the said Act, when imported into India from People's Republic of China. 2. The safeguard duty imposed under this notification shall be effective upto and inclusive of the 8th October, 2009 (unless revoked, superseded or amended earlier). [Notfn. No. 71/09-Cus., dt.19.6.2009] Whereas, in the matter of import of Aluminium Flat Rolled Products falling under heading 7606 and Aluminium Foils falling under heading 7607, of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) (hereinafter referred to as the said Act), from People's Republic of China, the Director General (Safeguard), in its preliminary findings vide number G.S.R. 65 (E), dated the 2nd February, 2009, published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i), dated the 2nd February, 2009, had come to the conclusion that increased imports of Aluminium Flat Rolled Products and Aluminium Foil into India from People's Republic of China had caused and threatened to cause market disruption to domestic industry of Aluminium Flat Rolled Products and Aluminium Foils, and that this had necessitated the imposition of provisional safeguard duty on imports of Aluminium Flat Rolled Products and Aluminium Foil into India from People's Republic of China; And whereas, on the basis of the aforesaid findings of the Director General (Safeguard), the Central Government had imposed provisional Safeguard duty on the subject goods vide notification of the Government of India in the Ministry of Finance (Department of Revenue), No. 26/2009-CUSTOMS, dated the 23rd March, 2009, published in the Gazette of India vide number G.S.R. 187(E), dated the 23rd March, 2009; And whereas, the Director General (Safeguard), in its Final findings vide number G.S.R. 369(E), dated the 29th May, 2009, published in the Gazette of India, Extraordinary, Part II, Section 3, Sub- section (i), dated the 29th May, 2009, had come to the conclusion that increased imports of Aluminium Flat Rolled Products and Aluminium Foil into India from People's Republic of China had caused and threatened to cause market disruption to domestic industry of Aluminium Flat Rolled Products and Aluminium Foil and it necessitated the imposition of definitive safeguard duty on imports of Aluminium Flat Rolled Products and Aluminium Foil into India from People's Republic of China ; Now, therefore, in exercise of the powers conferred by sub-section (2) of section 8C of the said Act, read with rules 12 and 14 of the Customs Tariff (Transitional Product Specific Safeguard Duty) Rules, 2002, the Central Government after considering the said findings of the Director General (Safeguard), hereby imposes a safeguard duty - (A) on Aluminium Flat Rolled Products falling under heading 7606 excluding- (a) Colour Coated Aluminium Coil with either PE (Polyester) Coating or PVDF (fluorine carbon) Coating falling under CTH 7606 (b) Aluminium Composite panels, (c) Aluminium-Manganese-Silicon based and/or Aluminium- Magnesium-Silicon based alloys whether clad or unclad; with thickness between 0.05 mm to 3.00 mm; with post brazing yield strength greater than 45 MPA, falling under tariff heading 7606 for use in heat exchangers including radiators, charge air coolers, condensers, oil coolers, heater cores, evaporators, heat ventilation and air conditioning (HVAC) systems and parts thereof, at the rate of :- i. 14% ad valorem, when imported from the 23rd day of March, 2009 to 22nd day March, 2010 (both days inclusive); and ii. 12% ad valorem, when imported from the 23rd day of March, 2010 to 22nd day March, 2011 (both days inclusive); (B) on Aluminium Foil falling under heading 7607 excluding - (a) Aluminium Foil of thickness less than 7 micron falling under CTH 7607 (b) "Aluminium foil of 10.5 micron with rough surface and perforated whether printed or not; to be used by beer bottling unit" (c) Colour Coated Aluminium Coil with either PE (Polyester) Coating or PVDF (fluorine-carbon) Coating falling under CTH 7607. (d) Etched or formed Aluminium Foils falling under CTH 7607 meant to be used in the manufacture of Electrolytic capacitors. (e) Poly Aluminium Foil Coated with Copolymer falling under CTH 7607 to be used in the manufacture of PIJF Telecom Copper Cables or Optical Fiber Cables. (f) Aluminium-Manganese-Silicon based and/or Aluminium- Magnesium-Silicon based alloys, whether clad or unclad; with thickness between 0.05 mm to 3.00 mm; with post brazing yield strength greater than 45 MPA, falling under tariff heading 7607 for use in heat exchangers including radiators, charge air coolers, condensers, oil coolers, heater cores, evaporators, heat ventilation and air conditioning (HVAC) systems and parts thereof. at the rate of :- i. 30% ad valorem, when imported from the 23rd day of March, 2009 to 22nd day March, 2010 (both days inclusive); and ii. 25% ad valorem, when imported from the 23rd day of March, 2010 to 22nd day March, 2011 (both days inclusive); 2. The Safeguard duty imposed under this notification shall be levied with effect from the date of imposition of the provisional Safeguard duty, that is, the 23rd March, 2009.
- 76161000Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers and similar articles
- 76169100Cloth, grill, netting and fencing, of aluminium wire
What is an HSN Code?
An HSN code (Harmonized System of Nomenclature) is an internationally standardised numeric system to classify traded products. Indian customs extend it to an 8-digit ITC-HS code for more precise classification, taxation and compliance.
- First 2 digits: Chapter (e.g. 76)
- Digits 3–4: Heading
- Digits 5–6: Subheading (WCO-aligned)
- Last 2 digits: Indian ITC extension for added granularity
Why is the right HSN code important?
- Ensures correct calculation of customs duties and taxes.
- Required for shipping bills, bills of entry, GST filings and FTA certificates of origin.
- Helps avoid clearance delays, penalties or reclassification disputes.
How to use this HSN code
Export Documentation
Use this code in your Commercial Invoice, Packing List, and Shipping Bill for exports from India.
Import Clearance
Required for the Bill of Entry and customs clearance when importing goods into India.
GST Classification
Drives the applicable GST rate, HSN-wise summary in GSTR-1 and ITC eligibility checks.
Common HSN code mistakes to avoid
- • Reusing outdated or incorrect codes from old shipments
- • Mixing up similar product codes without checking descriptions
- • Ignoring the last 2 digits which affect Indian duty rates
- • Not considering composition, end use or manufacturing process
- • Relying solely on online tools without professional verification
Need more information?
For complex products, consult with customs brokers or trade experts who can classify based on:
- • Physical product inspection
- • Material composition / manufacturing process
- • Intended end-use
- • Latest customs notifications & advance rulings
Additional Resources
• DGFT Policy: Guidelines for export-import procedures
• Customs Tariff: Complete HSN code list with duty rates
• GST Notifications: Latest tax-rate updates
• Trade Portal: Government trade documentation support
Related EximPe tools
Free, no signup — same trade-and-payments toolset your team uses to move money across borders.
Import Duty Calculator
BCD, IGST, cess and total landed cost for any HSN code — MFN and FTA rates.
Open toolSWIFT Code Finder
Verify SWIFT/BIC codes for global bank transfers. By country, city, or bank.
Open toolCurrency Converter
Live mid-market FX rates for 150+ currencies. Inbound INR conversions for exporters.
Open toolInvoice Generator
Build a cross-border invoice in minutes. Edit fields inline, export to PDF.
Open toolHSN Code 76169910 — FAQs
Duty, GST and classification questions answered from the official Customs Tariff data.
HSN code 76169910 (Expanded metal of aluminium and aluminium alloys) attracts 18% IGST under Schedule II of the GST notification.
The Basic Customs Duty (BCD) for HSN code 76169910 is 10%. On import, the landed duty also adds Social Welfare Surcharge (on BCD) and IGST (on the duty-inclusive value).
HSN code 76169910 covers Expanded metal of aluminium and aluminium alloys. It sits under Chapter 76 – Aluminium and articles thereof, in Section XV – BASE METALS AND ARTICLES OF BASE METAL.
The HSN code for Expanded metal of aluminium and aluminium alloys is 76169910, classified under Chapter 76 – Aluminium and articles thereof of India's Customs Tariff (ITC-HS).
The standard unit of quantity (UQC) for HSN code 76169910 is kg, as listed in the Customs Tariff.
Still have questions? Our support team is here to help 24/7.